Tuning Tools + Dealer Packages
CMD OBD+BDM Flash Package
The CMD OBD Flash system is one of (if not the best) flash tools on the world market today.
We have owned and tested almost every tool available to the tuning market and
found this to be the most reliable tool of them all
- BDM Motorola Mpc
- Bosch MED17 / EDC17 with Locked TRICORE
- C16x / ST10 Debug
- CAN V2.0B 1Mb/s
- K line ISO / KWP
- J1850 PWM
- Mitsbishi Lancer EVO 5->9
- Industrial Vehicles 24V
- Automatic resistor switch-K Line 470 ohm pull-up resistor for VAG EDC16
- Protection dongle is now inside the black box
- Old cars protocols ( i.e. EDC15, ME7, etc ) are now included
- Master/Slave option
- Recovery mode
- Automatic checksums
ALL THIS inside one box
CMDFlash Slave OBD + BDM Package
The CMDFlash tool is a reader/programmer BDM,EOBD K-LINE,EOBD CAN-BUS,EOBD PWM for all the new generation ECUs.
With BDM you need to unplug the ECU from the vehicle, open and connect it to
our tool using a
connector available on every EDC16,Marelli,Siemens and Delphi ECU.
The Software will allow you to read/write the Eprom (29bl802 / M58),
the internal firmware and the serial e2prom containing the car's codes
.
Checksum correction algoritm is available for all the ECU families, this
means
you don't have to care about checksums calculations .
With our tool it is possible to read all of the ECU's eprom thus allowing
the repair of
ECU's that have been locked out and will no longer
communicate with your OBD tool
All the ECU data can be stored in a single file with additional info like
brand,
model, make, chassis number, data, note, customer .....
with search facilities and information directly integrated in microsoft
windows explorer